Commercial · Orlando, FL
Need concrete demolition done cleanly and safely, without wrecking the surrounding property? Orlando Concreters has served Orlando since 2015, handling concrete demo and removal for driveways, patios, sidewalks, and commercial slabs with controlled breaks and responsible hauling.
Good demolition starts with prep and base planning. We locate utilities, confirm access for a skid steer or mini-excavator, and protect adjacent surfaces with plywood, poly, and temporary barriers. Saw-cutting is used to isolate sections and set clean edges, then we break concrete with electric jackhammers or hydraulic breakers and load out by machine. Once the slab is out, we evaluate subgrade, remove soft spots, and re-compact with a plate compactor so your next pour, pavers, asphalt, or landscaping has a stable base.
Central Florida conditions matter when removing concrete and prepping for replacement. Saturated sandy soils, drainage issues, and tree roots can undermine slabs, so we check for washouts, standing water, and root intrusion before we call the base ready. If you are re-pouring, we can prep for proper thickness and reinforcement (typically 4 inches for patios and sidewalks, 5-6 inches for driveways, thicker for commercial loads), including space for a 57 stone base, vapor barrier where needed, and rebar or welded wire mesh. We also plan control joint layout and slope so the new surface sheds water, and we can leave clean saw-cut lines where the demolition meets existing concrete for a neat tie-in.
Orlando customers choose us because we treat demo as a precision trade, not just brute force. Our crews use dust control and controlled-cut methods to reduce collateral damage to foundations, pool decks, pavers, and landscaping. You get clear scope and disposal planning up front, including concrete recycling options when available, plus straightforward scheduling and on-site communication. As a licensed and insured concrete contractor, we manage the risk points homeowners and property managers worry about, access, safety, and what the site looks like when we leave.
On the final walkthrough, we verify the demo limits, edges, and haul-off are complete, then confirm the grade and compaction for the next phase. You receive a clean site, load-out documentation if requested, and clear recommendations for base thickness, reinforcement, and drainage fixes based on what we uncovered. If you are replacing the slab, we can transition directly into forming, base rock placement, rebar dowels where appropriate, and a new pour with the finish you want (broom-finish, trowel, or decorative options). The goal is simple, remove the failing concrete, leave a build-ready pad, and keep your project moving without surprises.
Yes. We provide a free written estimate after reviewing site access, square footage, grade, and the scope of demolition, forming, reinforcement, and finish.
Yes. We handle saw-cutting where needed, demolition, loading, and disposal, then rebuild the base and forms for the new pour.
When permits are required, we can coordinate the process and build to Florida Building Code requirements. We will tell you up front if permitting is likely for your scope.
Yes. We install stamped concrete with texture mats, border patterns, and color options, then apply a suitable sealer based on the finish and expected wear.
Common causes include poor subgrade compaction, inadequate base, improper drainage, lack of control joints, and heavy loads on thin sections. Some cracking is normal, but good design and prep reduce random cracking and settlement.
Concrete demolition is more than breaking up a slab. The right approach protects nearby structures, controls dust and debris, and leaves a base that is ready for new concrete, pavers, asphalt, or landscaping. Orlando Concreters provides concrete demolition and removal for residential and commercial properties, including driveways, patios, sidewalks, garage floors, dumpster pads, and small foundations. We combine saw-cutting, mechanical breaking, and efficient haul-off so the job stays controlled and the site stays safe.
Every concrete demolition project starts with a plan: confirm slab thickness, reinforcement, and access, then isolate the work area. We typically use wet saw cutting to control cracking and protect adjacent concrete, then break the slab into manageable sections for safe lifting and loading. When demolition is near block walls, plumbing, or electrical runs, we switch to smaller tools and staged removal to avoid damage. Debris is loaded into dump trailers and removed promptly to keep the property usable.
After removal, the base is where many projects succeed or fail. We assess soil condition, drainage, and root activity, then remove unstable material and re-compact the subgrade with mechanical compaction. If you are re-pouring, we can prep for a proper stone base and reinforcement, plus elevation and slope for drainage. If you are converting the area to pavers or turf, we can grade and compact to the specs your installer needs so settlement does not come back later.
If you need concrete demolition in Orlando, we can quote from photos for many jobs and confirm details on site. Expect a written scope that covers cut lines, equipment, haul-off, and what the surface will look like when complete. The result is controlled demolition, complete removal, and a site that is ready for the next trade without delays.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Orlando. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
