Commercial · Orlando, FL
A properly built dumpster pad protects your pavement, improves drainage, and keeps haulers from rutting your lot. Orlando Concreters has served Orlando since 2015, pouring heavy-duty concrete pads for restaurants, apartments, retail, and HOA properties.
Dumpster pad performance starts with prep. We layout the footprint, verify clearances for truck approach and bin swing, then excavate to competent subgrade. Our crew installs compacted road base (typically 6-8 inches, adjusted for soil), geotextile when needed, and forms that lock in the slab edges; we compact with a plate compactor, check grade with a laser level, and place reinforcement such as #3 or #4 rebar on chairs or 6x6 W2.9 welded wire mesh to control cracking.
Central Florida heat, rain, and sandy soils demand smart details. We set slope for positive drainage, add thickened edges or a turndown where impact loads hit, and place concrete at a practical strength for vehicle traffic (commonly 4000 psi with fiber, higher when specified). For durability and safety, we finish with a broom-finish for traction, cut control joints to a clean layout, and seal the surface when the schedule calls for stain and moisture resistance; we also coordinate dumpster bumpers, steel wheel stops, and apron ties into existing asphalt or concrete.
Orlando customers choose us because we build for real hauling abuse, not just a “flat pad.” You get clear scope, concrete thickness and reinforcement matched to use, and a crew that shows up with the right equipment, from skid steer and saw cutter to screeds and vibrators for consolidation. We are licensed and insured, provide free written estimates, and communicate about access, staging, and cure time so your tenants, employees, and trash service are not surprised.
Our closeout is straightforward: we walk the site with you, confirm slope and joint placement, and review protection and curing steps (keep traffic off during the initial cure, then ramp up loading as scheduled). You receive a clean pad with crisp edges, proper jointing, and transitions that reduce trip hazards and prevent water from ponding at the dumpster corral. If your property needs add-ons like a reinforced approach strip, curb repairs, or a small retaining curb to keep bins aligned, we can include that in the same pour for a tighter, longer-lasting install.
Yes. We provide a free written estimate after reviewing site access, square footage, grade, and the scope of demolition, forming, reinforcement, and finish.
Yes. We handle saw-cutting where needed, demolition, loading, and disposal, then rebuild the base and forms for the new pour.
When permits are required, we can coordinate the process and build to Florida Building Code requirements. We will tell you up front if permitting is likely for your scope.
Yes. We install stamped concrete with texture mats, border patterns, and color options, then apply a suitable sealer based on the finish and expected wear.
Common causes include poor subgrade compaction, inadequate base, improper drainage, lack of control joints, and heavy loads on thin sections. Some cracking is normal, but good design and prep reduce random cracking and settlement.
A dumpster pad is a reinforced concrete slab designed to handle repeated point loads from metal dumpster wheels and impact from haul trucks. It keeps asphalt from rutting, reduces standing water around the enclosure, and helps protect curbs and nearby flatwork. Orlando Concreters installs dumpster pads for commercial properties and multi-family sites with layouts that fit your waste hauler’s approach and the bin size you use.
Good results depend on what is under the slab. We excavate to suitable bearing soil, install a base layer that is compacted in lifts, and form the pad to the correct elevation so drainage runs away from the corral. Reinforcement is set on chairs so it stays in the slab where it works, and we can thicken edges or add a reinforced approach where trucks brake and turn. Concrete mix design, thickness, and joint spacing are selected based on your use, not guesswork.
Finishing details matter for day-to-day operations. A consistent broom-finish helps prevent slip issues when the area is wet, and saw-cut control joints reduce random cracking. If you need a cleaner, easier-to-wash surface, we can discuss sealing options appropriate for dumpster areas. We also coordinate accessories like wheel stops, bollards, and bumpers so bins land where they should without damaging adjacent walls and curbs.
From estimate to final walkthrough, the goal is a dumpster pad that holds up and stays easy to maintain. We provide a written proposal, confirm access for deliveries and trash service, and schedule the pour to minimize disruption. When the job is complete, you get a durable concrete pad with proper slope, jointing, and edges, plus straightforward guidance on cure time and when to resume full loading.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Orlando. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
